BBTXQ - ALLOY RENE 41
- MSDS: BBTXQ
- Manufacturer: G AND S TITANIUM INC
- Product Name: ALLOY RENE 41
- National Stock Number: 9535-00F006105
Product Identification
Product ID:ALLOY RENE 41
MSDS Date:01/01/1987
FSC:9535
NIIN:00F006105
MSDS Number: BBTXQ
Responsible Party
Emergency Phone: (216) 263-0564
Cage: FO168
Contractor
Telephone: (216) 263-0564
Cage: FO168
Ingredients
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 19%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
COBALT (SARA III)
CAS: 7440-48-4
RTECS: GF8750000
Fraction By Weight: 11%
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
MOLYBDENUM
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9293
NICKEL (SARA III)
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 55%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 3%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
Effects of Overexposure:NAUSEA; TIGHTNESS OF CHEST; FEVER; EYES, NOSE,
THROAT, OR SKIN IRRIT; LOSS OF CONSCIOUSNESS/DEATH.
First Aid
First Aid:SKIN: BRUSH OFF SKIN & CLOTHING. WASH W/SOAP & WATER. WOUNDS:
REMOVE METALLIC PARTICLES & CLEANSE. INGESTION: SEEK PROMPT MEDICAL
ATTENTION. EYES: FLUSH W/WATER. SEEK MEDICAL ATTENTION. INHALATION:
RE MOVE TO FRESH AIR. GIVE OXYGEN IF NEEDED.
Fire Fighting
Flash Point:NONFLAMMABLE.
Extinguishing Media:SAND, DOLOMITE, GRAPHITE POWDER, OR SODIUM
CHLORIDE.
Unusual Fire/Explosion Hazard:MODERATE FIRE & EXPLOSIVE HAZARD WHEN
EXPOSED TO HEAT, FLAME, ELECTRIC CURRENT, OR SPARK.
Accidental Release
Spill Release Procedures:RESIDUE FROM CUTTING OR GRINDING SHOULD BE
SWEPT OR VACUUMED & PLACE IN SUITABLE CONINERS.
Handling
Handling and Storage Precautions:PREVENT ACCUMULATION OF DUST,
GRINDINGS, ETC. THROUGH THE USE OF GOOD HOUSEKEEPING PRACTICES.
Exposure Controls
Respiratory Protection:IF >TLV, USE OSHA APPROVED RESPIRATOR.
_
Ventilation:PROVIDE EXHAUST VENTILATION TO KEEP
Other Protective Equipment:TO BE USED WHEN CUTTING, GRINDING, OR
WELDING.
Supplemental Safety and Health
MSDS UNDATED: ALSO CONTAINS: ALUMINUM (BD0330000) 2%.
Chemical Properties
Solubility in Water:NOT SOLUBLE
Appearance and Odor:STEEL GRAY IN COLOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, NITRIC OR CHROMIC ACIDS.
Disposal
Waste Disposal Methods:DISPOSAL BY LOCAL, STATE, OR FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.